If Network Connection is Limited in Window 10! How to Fix It?

Users usually find the issue, like Network Connection is Limited in Window 10. But if the user wants to fix this issue, then they must read the below article.

Method to Fix If Network Connection is Limited in Window 10:

  1. Update your Drivers: If the user is getting the Limited Internet connection error in their PC, then this issue occurs because of your drivers. Generally, outdated drivers cause this issue and to fix this issue you should update your drivers. User can use a dedicated professional solution such as DriverFix to update your drivers.

  2.  Restart your Modem or Wi-Fi Adapter: You should press Windows Key + X altogether and then select Device Manager from the list. Now, you should find your networking device, and then right-click on it and after this, tap on Disable. After this, you should Restart your computer system. At the end, you should visit to Device Manager again and then enable the networking device.

  3. Check your Antivirus Settings: It’s very important to have antivirus software in your device but sometimes these issues occur because of antivirus. To fix this issue, it is suggested you should change your settings. When you adjust some settings then the issue was solved. You can also temporarily disable your antivirus, and if removing the antivirus fixes the issue then you should switch to a different antivirus solution. It is advised you should use Webroot antivirus software through www.webroot.com/safe as it safeguards your computer from all kind of internet threat.

  4. Reset TCP Connection: You should right-click on the Start Menu button and then open Command Prompt as an Admin. Now, you should enter the following lines and then press Enter key after you enter each command:
    netsh int tcp set heuristics disabled
    netsh int tcp set global autotuninglevel=disabled
    netsh int tcp set global rss=enabled
    After this, you should enter this command to check that previous functions was disabled:
    netsh int tcp show global
    At the end, you should close the Command Prompt window.

  5. Run Windows Networking Troubleshooter: First, you should go to Search and then type troubleshoot. After this, you should select Troubleshoot from the menu. Now, you have to choose Network Adapter and then hit on Run the troubleshooter. At last, you should follow the instructions on the screen.

  6. Assign Manual IP Address: You should tap on the network icon in your Taskbar and then you should select your network from the menu. After this, you should tap on Change adapter options. Now, you have to locate your network connection and then right-click on it and then select Properties from the menu. After this, you should select Internet Protocol Version 4 (TCP/IPv4) and then tap on Properties. Here, you should Use the following IP address and then you should set the following data:
    IP address: 192.168.1.25
    Subnet mask: 255.255.255.0
    Default gateway: 192.168.1.1
    At last, you should tap on OK button to save changes.

With this above method, the user can solve the issue If Network Connection is Limited in Window 10. If the customer wants more information about Webroot, then go to webroot.com/safe.

Add a Comment

Your email address will not be published. Required fields are marked *